MS25165F
TABLE I. Part Numbers and Dimensions.
MIL - PART NUMBER |
B ± .001 |
A ± .001 |
SHAFT SIZE |
COLOR |
MS25165-1 |
.223 |
.253 |
.250 |
GRAY |
MS25165-2 |
.107 |
.127 |
.125 |
GRAY |
MS25165-3 |
.223 |
.253 |
.250 |
BLACK |
MS25165-4 |
.107 |
.127 |
.125 |
BLACK |
Notes:
1 Dimensions are in inches.
2 Unless otherwise specified, tolerance is ± .016 (.41 mm), angle ±2° 0'.
3 Metric equivalents (to the nearest .01 mm) are given on figure 1 for general information only and are based upon 1 inch = 25.4 mm.
4 For design feature purposes, this standard takes precedence over procurement documents referenced herein.
5 Referenced documents shall be of the issue in effect on the date of invitation for bid.
6 Material: Knob, transparent thermoplastic. Insert, brass per ASTM B36/36M. Setscrew, CRES
per SAE-AMS-S-7720.
7 Finish: Knob, grey or black color number 36231 or 37038 per FED-STD-595. Index line, white color number 37875 per FED-STD-595. Insert, nickel plate per SAE-AMS-QQ-N-290, bright finish, Class 2, Grade G.
8 Percent transmittance 12.0 ±3%.
9 There shall be no light leak around the setscrew.
10 Bottom surface of the knob shall be polished.
11 All outside corners and inside fillets shall have a .04 (1.02 mm) radius.
12 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business